• The Adportas i2M Mini LTE-BPS2 is a data gateway that allows you to connect computers and industrial units that have serial data communication ports (RS232 and RS485) to the Internet via a mobile network.
• Its main uses are remote monitoring of processes and/or sensors (4 digital inputs), telemetry, telemetry and geolocation (via integrated GPS).
• Antennas: GPS, WIFI, LTE, LTE Aux. and GPS.
• Number of supported SimCards: 1.
• Serial communication: RS232 or RS485.
• Housing: Black anodised aluminum.
• Product dimensions in millimeters: 109.60 x 59.7 x 26.3.

• Input voltage: 12VDC @ 1A.
– Adapter 90-240VAC / 50-60Hz.
• Serial Communication: RS232 or RS485 (2400 to 115200 Baud).
– RS232 – 2400 to 115200 Baud.
– Null modem support.
– Support HW handshaking.
– DB9F connector.
• Wireless communication (mobile network):
– LTE-TDD: B40
– LTE-FDD: B1 / B2 / B3 / B4 / B5 / B7 / B8 / B28.
– MTS / HSPA+: B1 / B2 / B5 / B8.
– GSM / GPRS / EDGE 850 / 900 / 1800 / 1900MHz.
• Speed characteristics (mobile network):
– LTE CAT4.
– Uplink 50Mbps / Downlink 150Mbps.
– HSPA +- Uplink 5.76 Mbps Downlink 42.0 Mbps.
– UMTS – Uplink / Downlink 384.0 Kbps.
– EDGE – Uplink / Downlink 236.8 Kbps.
– GPRS – Uplink / Downlink 85.6 Kbps.
• Antenna:
– Frequency range: 700 – 2700MHz.
– Gain: 7dBi.
• WLAN Standard: IEEE 802.11 b/g/n.
– Wired communication (WIDI), for configuration and/or reading.
• Operator mode: AP.
– Wireless communication (WIDI), for configuration and/or reading.
• Clock: SNTP, NITZ (network identity and time zone) or GPS in selectable UTC format.
• Digital ports: 4 isolated inputs.
– Voltage range 12 – 50 VDC.
• LAST GASP power backup per supercapacitor, 3 minutes minimum autonomy *.
• Dual SMA connector for external 4G antenna. (Diversity, dual radio circuit)
• Number of supported SimCards: 1
• SimCard format: Mini SIM (2FF) 1.8 / 3.0V.
• Configuration: via the web through a viewing and configuration portal. two
© Adportas 2021, all rights reserved. v.2.0
• Watchdog integrated by HW and SW.
• Security protocols
• Schedule
• Firmware Update
• LED indicators:
– Power: indicates that the equipment is turned on.- Status: indicates whether or not you are connected to the network.
– Serial: indicates if there is activity on the serial communication bus (RS232 and/or Rs485).
• Operating temperature: -20°C to 70°C.
• Installation type:
– By screws.
– Optional: Din Clip for rail installation.
Time insured with a minimum charge period of 25 min. Exposing the equipment to temperatures above 65°C can shorten the life of the supercapacitor and therefore shorten runtime.
– Relative humidity: 90%
– Input / output port filter.
– Password management (complexity, minimum characters, etc).
– Option to change the equipment’s default passwords.
– Option to disable the services you do not want to use (SNMP, FTP; etc).
– OpenVPN
– The equipment software update will be done directly through a USB connection or via
remotely point to a valid web address on the network.
– The i2M Mini LTE-BPS2 has an OpenLinux operating system, which allows you to run most commands
Popular Linux.
Pearl and/or C files can be embedded.